SAVE 33% ON ALL SAW BLADES. USE DISCOUNT CODE SAW33

Josco - Brumby SSX Polishing Compound (Green)
Josco - Brumby SSX Polishing Compound (Green)
Load image into Gallery viewer, Josco - Brumby SSX Polishing Compound (Green)
Load image into Gallery viewer, Josco - Brumby SSX Polishing Compound (Green)

Josco - Brumby SSX Polishing Compound (Green)

Regular price £9.47

Unit price per 

only 1 left in stock

The Brumby SSX Polishing Compound is ideal for polishing applications on copper, brass and stainless steel where a high gloss finish is desired. 

Suitable for use on a bench grinder.

For the best results, use the compound with a Josco Loose Leaf Calico Buff.

Josco also has three other types of polishing compounds available in its range, in both standard and large sizes. They are all intended for use on surfaces without major blemishes, resulting in little metal removal and will achieve a bright result. Any small scratches that are produced by cutters can subsequently be removed with the use of a finishing compound.

It is important to recognise that different metals have varying characteristics which require the correct buff and compound to be used when working on your surface material. For best results, only apply a small amount of compound at a time. It is better to apply small amounts of compound frequently rather than overdressing the buff. 

Directions for use:

  1. Most buffs have a tapered centre bore, and
    maybe mounted on the left or right of your
    grinder using a tapered spindle.
  2. Select the correct buffs and compounds
    for your job. Initial cutting can be done with a
    fast-cut compound and either a stitched sisal
    or a stitched rag buff followed by a polishing
    compound and a loose-leaf buff. For best
    results, never use different compounds on
    the one buff – keep a separate buff for each
    compound.
  3. Apply the compound across the face of the
    rotating buff for a few seconds, taking care
    not to apply too much compound which will
    overload the buff. It is far better to apply a little
    compound more frequently than to overdress
    the buff.
  4. After applying the compound to the buff,
    bring the workpiece into contact with the buff
    and with light pressure, move back and forth
    across the job.
  5. After polishing, remove any compound
    the residue left on the workpiece with mineral
    turpentine or methylated spirits, or warm soapy
    water.

Specifications:

  • Barcode: 9314028001101
  • Size: Standard
  • Colour: Green

Part code: SSXCARD

Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Added to cart

English en