Brumby Fastcut Cutting Compound is best used to “cut back” light scratch marks on copper, brass and stainless steel, steel and aluminium prior to polishing when in use with a Josco Stitched Sisal Buff.
Different metals have varying characteristics, and to achieve the best possible results it is essential that the correct polishing compound and buff are selected for the job.
Directions for use:
- Most buffs have a tapered centre bore, and
may be mounted on the left or right of your
grinder using a tapered spindle.
- Select the correct buffs and compounds
for your job. Initial cutting can be done with a
fastcut compound and either a stitched sisal
or a stitched rag buff followed by a polishing
compound and a loose leaf buff. For best
results, never use different compounds on
the one buff – keep a separate buff for each
- Apply the compound across the face of the
rotating buff for a few seconds, taking care
not to apply too much compound which will
overload the buff. It is far better to apply a little
compound more frequently than to over dress
- After applying the compound to the buff,
bring the work piece into contact with the buff
and with light pressure, move back and forth
across the job.
- After polishing, remove any compound
residue left on the work piece with mineral
turpentine or methylated spirits, or warm soapy
Part number: FASTCUTCARD
The feedback we received at the 2019 Woodworking and Power Tool Show in Harrogate on the Josco - Fastcut Cutting Compound - FASTCUTCARD was fantastic. Add it to your kit today for only £7.33.